Argo Facades

Unitized Glazing Service entail factory fabrication and assembly of panels and may include factory glazing. These completed units are installed on the building structure to form the building enclosure. 

We provide Structural glazing for the commercial complexes and other structures like ACP Structural Glazing, Aluminum Structural Glazing which we have our own design team to design your structure. With 22 years of experience. It will be o maintenance except washing once a while, good look for your structure, materials are jindal and saint gobain glass of one way.

We are looking for queries from Bangalore, Karnataka only.

For unitised curtain walling, about 30% of the work is done on site, while 70% is carried out in the factory. The complete assembly of the units in the factory brings a number of benefits.

These include:

• Improved quality control
• Concurrent manufacture and site preparation - units can be assembled while the structural frame is being built. The facade can also be   
• completed a floor at a time, allowing parallel internal work
• Quicker installation, requiring less manpower on site
• No need for scaffolding
• Can be installed from the interior of the building. This is ideal for high towers or building sites where there is a tight footprint
• Less space is needed on site for layout – another advantage

Another advantage of unitised systems is that, unlike stick systems, they do not transfer impact noises from floor to floor or horizontally from room to room. This is because the unitised panels are separated by linking gaskets. The different materials (ie, gasket to aluminium), become acoustically excited to different levels, thus creating full separation at the junctions between units.

The increased use of factory assembly introduces other important considerations.

These include the following:

• The workshop has to be adequately equipped to handle finished elements
• Additional transport is required to get finished elements to site
• Additional equipment is required on site for installation of the modules.

Additional Information:

• Delivery Time: 60 DAYS

To cater the variegated needs of our esteemed customers, we are highly engaged in offering a wide array of Front Elevation Structural Glazing Service.

Semi Unitized Glazing Service are more economically viable on smaller projects or larger projects that require many wall conditions. The system is typically based on the use of spanning vertical and occasional horizontal components that receive the pre-assembled, pre-glazed vision and spandrel panels. The opaque areas can be a wide range of materials including glass, metal, earthen and composites.

Thickness also available in 6mm, 10mm, 12mm, 24mm

Stick Glazing Service is a type of Structural Glazing where the frame verticals or the mullions and the glass panels are erected and connected piece by piece. It is one of the oldest curtain wall types. The vertical mullions are attached first to the floor slabs and then the horizontal mullions are attached to the vertical ones. The glass panel between the vertical and the horizontal mullions along with the spandrel which can be either glass or aluminium are then installed into the erected grid work. The visual effect of stick framing is often taken into account since there will be more vertical mullions taking the wind load than other glazing systems.

Generally, stick-type glazing is preferred for buildings that are not that tall, usually less than 3-4 floors. Air, wind, and heat can play a vital role the stability and the stick glazing method takes these factors while they are built. Usually, the glass units between the aluminium frame slide when there is a thermal factor. This factor is taken into consideration and provisioned when the glazing is done.